Search

(...) This Fourth Annex allows the import of menstrual tampons, subject to the Israel Mandatory Standard SI 1313 and that complies with the Australian Standard AS 2869, to be imported into Israel based on an importer's declaration of conformity and a compliance certificate.

(...) This Fourth Annex allows the import of dishwashing powders, subject to the Israel Mandatory Standard SI 1417 and that complies with the European Regulation EC 1272/2008, to be imported into Israel based on an importer's declaration of conformity, with the following pre-conditions:
• Biodegradability of minimum 80% according to EC 648/2004;
• Borax content of up to 0.5 g/kg product, in accordance with the International Standard ISO 6835.
(...)
• Marking of the chemical composition according to EC 648/2004.

(...) This Fourth Annex allows the import of hand dishwashing liquid, subject to the Israel Mandatory Standard SI 139 and that complies with the European Regulations EC 1272/2008 and EC 648/2004, to be imported into Israel based on an importer's declaration of conformity, with the following pro-conditions:
• Borax content of up to 0.5 g/kg product, in accordance with the Israel Standard SI 692;
• A test report (...) shall be added to products with pH higher than 10 or lower than 4.
(...)
• Marking of the chemical composition according to EC 648/2004;
• Declaration on biodegradability compliance of the surface active materials according to EC 648/2004.

(...) This Fourth Annex allows the import of laundry powders, subject to the Israel Mandatory Standard SI 438 and that complies with the European Regulations EC 1272/2008 and EC 648/2004, to be imported into Israel based on an importer's declaration of conformity,
with the following pro-conditions: (...)
• Biodegradability of minimum 80% according to EC 648/2004;
• Chloride content of up to 40 g/kg in washing machine, up to 90 g/kg in hand wash, in accordance with the American Standard ASTM D820;
• Borax content of up to 0.5 g/kg product, in accordance with the International Standard ISO 6835.
(...)
• Marking of the chemical composition according to EC 648/2004.

Revision of the Mandatory Standard SI 71568 part 4, dealing with foam concentrates fire extinguishers. This draft standard revision adopts both the European Standard EN 1568-4: February 2018 and the American Standard ANSI/UL 162 – Eighth Edition: February 23, 2018 (only the requirements applying to low expansion foam concentrates for surface application to water-miscible liquids).
The standard's Hebrew section includes a few national deviations as follows:
1. In the European route of compliance (Chapter A):
o Adds to the standard's introduction a reference to the Mandatory Standards SI 2302 parts 1-2, dealing with the classification, labeling, marking, packaging and transportation of dangerous substances and mixtures; (...)
o Changes the requirements of Section 12 dealing with occupational health and ecotoxicological requirements; (...)
2. In the American route of compliance (Chapter B): Changes the standard's scope to apply to low expansion foam concentrates for surface application to water-miscible liquids ; (...)
o Adds a new Section 27 dealing with ecotoxicological requirements.
The major differences between the old version and this new revised draft standard are as follow:
• Adds to both routes of compliance new requirements that limit the maximum concentration of perfluorooctanoic acid (PFOA), its salts and PFOA-related compounds and of perfluorooctanoic acid (PFOA), its salts and PFOA-related compounds, in foam concentrates (...)

SI 60745 part 1 – Hand-held motor-operated electric tools – Safety: General requirements: The following sections of the existing Mandatory Standard, SI 60745 part 1 shall be declared voluntary: (...) Section 202 (national deviation) - Environmental requirements for noise pollution. (...)

Viscose Staple Fibres (Quality Control) Order, 2022: This order seeks to ensure conformity of Viscose Staple Fibres listed in the schedule to the specified Indian Standard.

The Minimum Energy Performance Standards (SKEM) and Energy Saving Label for television, consist of:
a. types of television;
b. energy saving rate, shape, and specification of the Energy Saving Mark;
c. type of certification testing;
d. performance testing requirements and procedures;
e. exemption of energy-saving certification obligations;
f. non-conformance tolerance for sampling test results.
The inclusion of the Energy Saving label originating from import products is done in the country of origin. The Energy Saving Label is affixed to or attached with not-easily removed material. The Energy Saving Label on the packaging can be imprinted in a contrasting colour. The form and specifications of the Energy Saving Label refers to Appendix. Domestic manufacturers and importers of television must submit a report application of Minimum Energy Performance Standards to Director General of New, Renewable Energy and Energy Conservation periodically every 3 (three months) which include:
a. brand;
b. type, variant, or model;
c. power;
d. total amount.
of production or imported television. (...)

The Minimum Energy Performance Standards (SKEM) and Energy Saving Label for smoothing-iron, consist of: a. types of smoothing-iron; b. type of certification testing; c. energy saving rate, shape, and specification of the Energy Saving Mark; d. performance testing requirements and procedures; e. exemption of energy-saving certification obligations; f. non-conformance tolerance for test results.
The inclusion of the Energy Saving label originating from import products is done in the country of origin. The Energy Saving Label is affixed to or attached with not-easily removed material. The Energy Saving Label on the packaging can be imprinted in a contrasting colour. The form and specifications of the Energy Saving Label refers to Appendix. Domestic manufacturers and importers of smoothing-iron must submit a report application of Minimum Energy Performance Standards to Director General of New, Renewable Energy and Energy Conservation periodically every 3 (three months) which include:
a. brand; b. type, variant, or model; c. power;
d. total amount. of production or imported smoothing-iron. (...)

The Minimum Energy Performance Standards (SKEM) and Energy Saving Label for water pumps, consist of:
a. types of water pump;
b. type of certification testing;
c. energy saving rate and shape of the Energy Saving Mark;
d. performance testing requirements and procedures;
e. exemption of energy-saving certification obligations;
f. non-conformance tolerance for test results.
The inclusion of the Energy Saving label originating from import products is done in the country of origin. The Energy Saving Label is affixed to or attached with not-easily removed material. The Energy Saving Label on the packaging can be imprinted in a contrasting color. The form and specifications of the Energy Saving Label refer to Appendix. Domestic manufacturers and importers of water pumps shall submit a report application of Minimum Energy Performance Standards to the Director General of New, Renewable Energy and Energy Conservation periodically every 3 (three months) which include the following information:
a. brand;
b. type, variant, or model;
c. capacity/power/volume/diameter;
d. Quantity
of electric water pump produced or imported to Indonesia. (...)